Acoustic overlay flooring product suitable for use on new and existing timber and concrete floors. The substrate layers of moisture-resistant MDF and fibreboard are separated by visco-elastic
sound damping strips. The underside incorporates a resilient layer of acoustic felt which provides mechanical isolation from the existing floor structure. REDUC® Micro 17 is 17mm thick and is designed to damp vibration and attenuate both airborne sound and impact noise passing through floors whilst having minimal impact upon room height.
£86.93
Key Features and Benefits
System Components
| Overall dimensions | 1175mm x 575mm x 17mm thick |
| 6mm Moisture Resistant T&G MDF 4mm Fibre Board 1mm Isolation layer |
|
| Resilient layer composition |
6mm decoupled felt |
Performance
| Treated timber floor | DnT,w+Ctr | LnT,w |
| 43dB | 58dB |
Performance figures based on REDUC® Micro 17 laid over 18mm chipboard with a ceiling construction of 45kg/m3 insulation between joist & 2 x 12.5mm plasterboards.
| Treated timber floor with resilient bar ceiling | DnT,W + Ctr | LnT,W |
| 50dB | 50dB |
Performance figures based on REDUC® Micro 17 laid over 18mm chipboard with a ceiling construction of 45kg/m3 insulation between joist & 2 x 12.5mm plasterboards on resilient bars.
| Treated concrete floor | ΔLW | |
| 27dB |
Micro 17 on a 365kg/m2 concrete floor with plaster skim ceiling exceeds the Building Regulations minimum requirement of 17dB.
Flanking Transmission
The performance figures quoted above are based on test results for 225mm timber and 365kg/m2 concrete floors using the components indicated and can only be expected
if the building design and construction has followed good practice to ensure all potential flanking paths have been eliminated. In order for wall and floor constructions to be
fully effective, extreme care should be taken to correctly detail the junctions between the separating wall or floor and the associated elements such as external walls and any penetrations. If junctions are not detailed correctly, the acoustic performance will be limited and Building Regulation requirements may not be achieved in practice.
Acoustic overlay flooring product suitable for use on new and existing timber and concrete floors. The substrate layers of moisture-resistant MDF and fibreboard are separated by visco-elastic
sound damping strips. The underside incorporates a resilient layer of acoustic felt which provides mechanical isolation from the existing floor structure. REDUC® Micro 17 is 17mm thick and is designed to damp vibration and attenuate both airborne sound and impact noise passing through floors whilst having minimal impact upon room height.
